Turntable Control - RCA RMW1749-SS Owner's Manual

press number pad
My Settings
3. Press
 DAYLIGHT SAVE TIME HINT
My Settings
1. In standby, press
2. Press number pad
STATE IS OFF, 1-ON,2-SKIP" or "CURRENT STATE IS ON ,1-OFF,2- SKIP"
3. Use the number pad to enter the new clock time, and then press
present clock.
NOTE: The default startup state: SOUND to On, WEIGHT UNIT for oz, DAYLIGHT SAVE TIME to off

Turntable Control

For most cooking, the turntable should be on; however the turntable can be turned off so that it does
not rotate for extra large dishes, such as the 13×9×2 glass utility casserole. Put the casserole on the
Turntable
turntable, press
NOTE: Sometimes the turntable may become too hot to touch. Be careful to touch the turntable.
Select Vented Exhaust Fan Direction
To ensure good cooking effect, the installer (or user) needs to set installation direction of the fan.
1. In standby mode, press and hold "
EXHAUST FAN DIRECTION <1-UPWARD, 2-BACKWARD, 3-FORWARD >"
2. Press corresponding number pad according to the vented exhaust fan direction.
Start/Add 30Sec
3. Press
to standby mode.
NOTE: The factory default installation direction is upward.
2
to select sound off, "MUTE" is displayed.
to confirm you choose.
once.
3
to enter the Daylight Saving Time setting. The display will show "CURRENT
pad to turn the turntable on or off.
0
" for 3 seconds, the display will cycle show "SELECT VENTED
pad to confirm. The system saves the installation direction and returns
My Settings
to confirm the
19