Table of Contents
Advertisement
REASSEMBLY AND ADJUSTMENT
FUJICA GS645
o
Locking the shutter release when the front cover mechanism is in the folded
state.
The leaf spring (5- 16) locks the lever (6- 11), causing the interlock lever (3- 110)
to be pulled.
Then, the shaft (3- 73) enters beneath the release plate assembly (3 -11).
Thus, the shutter release cannot be depressed.
When the shutter release is not locked normally, check the leaf spring (5- 16).
If this leaf spring is disengaged with the guide shaft (5- 13), positioning cannot
be made correctly.
Check the set screw (5- 20) to insure that it is tightened securely.
Check that the lever (3- llO) is caused to move smoothly by the spring (3- 71).
-42-
Advertisement
Table of Contents
