Table of Contents
Advertisement
REASS_EMBLY AND ADJUStMENT
FUJICA GS645
d. Ending exposure of the last frame of a 220 film
The lever (3- 2) is set to the 220 film with the film selector knob of the
top cover assembly, and thus, the lever is separated from the counter dial.
If
the lever is not separated from the counter dial, film winding is freed
at the 16th frame. ,
When the 30th frame is exposed, and the film advance lever is wound up,
the projection of the counter dial enters beneath the lever (3- 121), and
·.the lever (3- 121) is kept in the separated state.
When_ the leve(
(3-
121) runs against the dial (3- 51), check the film
-
-
advanCing timing for delay.
e. . 1st frame film position
. A
120. film has
a
mark on the film leader.
Match this mark with the
mark on the .camera' body, and advance the film to the 1st frame.
Some times, the 1st frame film position may be deviated from the number
indicated on the back of the film.
This deviation should be within
±%
frame.
[When excessive1y- deviated]
o
Make sure that the disc ( 3 - 85) is returned to the predetermined
position by the spring (3 - 82) when the film chamber door is opened.
o. At position S, there should be a gap between the claw (3 - 115) and
counter gear ( 3
~-
52}.
-36-
Advertisement
Table of Contents
