Table of Contents
Advertisement
REASSEMBLY AND ADJUSTMENT
FUJICA GS645
*
When beginning to advance the film and the release lever assembly
(3- 64) is about to disengage with the cam (3 - 46), the groove of the
disc (3- 85) must have been separated from the rising portion of the
lever (3 - 121) by the film.
6
If this alignment is incorrect, one frame is overlapped with
another.
When the lever (3- 121) is limited at
th~
periphery of the disc (3- 85),
the lever (6- 64) should not engage with the ratchet wheel (6- 72).
6
When this arrangement is improper, one frame is overlapped
with another or noise is generated.
c. Ending exposure of the last frame of a 120 film.
The lever (3- 2) is pushed up by interlocking with the counter, and the
lever (3- 121) is kept in the released state.
6
Film can be wound up to the end in the manner similar to
the film advancement from S to 1.
NOTE:
The lever (3- 2) must be pushed by the leaf spring (3- 9) toward
the arrow (A) direction.
-34-
Advertisement
Table of Contents
