Accessories; Service - Husqvarna DM400 Operator's Manual

Indication on the product
3 green LEDs, 1 yellow
LED and 1 red LED.
All LEDs flash.
1 green LED flashes.

Accessories

Accessory
Drill stand DS 500
Slurry ring*
Sealing disc*
Rubber washer, part number 598 72
14-01
* Contact you local service agent for more information
Approved service center
To find your nearest Husqvarna Construction Products
approved service center, go to the web site
www.husqvarnacp.com.
20
Cause
There is a system overload.
™
Elgard motor overload protection is started.
™
Elgard motor overload protection has stopped
the motor.
™
Smartstart is started.
Accessories
Securing by vac-
uum pad: OK

Service

DM400
Other securing:
OK
OK
OK
OK
Possible solution
Decrease the load to prevent start of
™
the Elgard motor overload protec-
tion.
Decrease the load to go back to cor-
rect operation.
To reset the motor overload
Refer to
protection on page 14 .
To use Smartstart
Refer to
page 12 .
DM430
Securing by vac- Other securing:
uum pad: OK
OK
OK
OK
1188 - 005 - 08.01.2020
™ on
OK