The Anti-Tip Bracket; Door Panel Pat - Whirlpool RF310BXY Use And Care Manual

The anti-tip bracket
The range will not tip during normal use. However, tipping can occur if you apply too much
force or weight to the open door without the anti-tip bracket properly secured.
Personal Injury Hazard
*To reduce risk of range tipping over, secure range with a properly
installed anti-tip bracket supplied with range or an optional wall-
mounted anti-tip bracket kit.
l
If range is moved for cleaning or service, check that anti-tip device
is engaged before using range.
Failure to follow the above precautions could result in personal injury.
To verify the anti-tip bracket is
engaged (if you have a floor
bracket):
l
Remove the storage drawer. (See page 16.)
l
Look to see if the anti-tip bracket is attached
to floor with screws.
l
Make sure one rear leveling leg is positioned
under the anti-tip bracket.
l
See Installation Instructions for further details.
To verify the anti-tip bracket is
engaged (if you have a wall
bracket):
l
Look to see if the anti-tip bracket is attached
with screws to the wall behind the control
panel.
l
Make sure the cable on the back of the range
is secured by the two hooks on the bracket.
l
Cable must be unhooked from wall bracket to
move range for cleaning or service. Recon-
nect cable before using range.
l
See Installation Instructions for further details.
Rear
leveling
leg
Floor bracket
Cable
(attached
to rear of
control
panel)
Wall bracket
Optional door panel pat
If you would like to change the color of your
oven door glass to white or almond, you can
order one of these kits from your Whirlpool
Dealer. The kits include easy installation
instructions.
l
White (Kit No. 814071)
l
Almond (Kit No. 814072)
17