REVENT RVL50 Installation Manual page 17

WARNING: Disconnect the AC power before any work is done to any part of
the circuit ReVent is connected to. If you do not understand this warning,
seek the services of a qualified licensed electrician.
WARNING: Copper to copper only. Do not use aluminum wire.
WARNING: Follow all local electrical and safety codes, and NEC (National
Electrical Codes).
CAUTION: If your house wires do not match these colors, determine what
each house wire represents before connecting. You may need to consult a
qualified licensed electrician to determine this safely.
6.) Disconnect FAN motor from electrical enclosure. Remove the electrical cover
set screw and slide open the electrical enclosure.
unplug fan connectors
remove set screw
7.) Connect wiring using the provided QUICK CONNECTS (U.S.A.) or WIRE NUTS
(Canada).
2-WIRE QUICK
CONNECT
(U.S.A. only)
Wire connection for fan and light on separate switches:
FAN
ground
housing
ground
4-WIRE QUICK
Qty:2
line
ground
line
ground
CONNECT
Qty:3
(U.S.A. only)
line
neutral
line
neutral
FAN
neutral
light
neutral
16
slide
OR
WIRE NUT
Qty:4
(Canada only)
line in
light
light
line in
FAN
FAN