Download Print this page
Enerco Journey Series Operating Instructions And Owner's Manual

Enerco Journey Series Operating Instructions And Owner's Manual

Catalytic heater

Advertisement

Available languages

Available languages

Quick Links

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
OPERATING INSTRUCTIONS AND OWNER'S MANUAL
CATALYTIC HEATER
Model # ECAT3LP • ECAT6LP • ECAT8LP
PORTABLE PROPANE HEATER
FOR RECREATIONAL USE
FOR US SALE EXCEPT
MASSACHUSETTS
LANGUAGES INCLUDED:
• ENGLISH
• SPANISH
If the information in this manual is not followed exactly, a fire or
WARNING:
explosion may result causing property damage, personal injury or loss
of life.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire department or a qualified service agency.
Installation and service must be performed by a qualified installer, service agency or the gas supplier.
This is an unvented gas-fired portable heater. It uses air (oxygen) from the area in which it is used. Adequate
combustion and ventilation air must be provided. Refer to page 3.
READ INSTRUCTIONS CAREFULLY: YOUR SAFETY IS IMPORTANT TO YOU AND TO
OTHERS. Read and follow all instructions. Place instructions in a safe place for future
reference. Do not allow anyone who has not read these instructions to assemble, light,
adjust or operate the heater.
DO NOT OPERATE HEATER WITH DUST SHIELD IN PLACE
www.enerco.com
888-849-1899
36880

Advertisement

loading
Need help?

Need help?

Do you have a question about the Journey Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Enerco Journey Series

  • Page 1 READ INSTRUCTIONS CAREFULLY: YOUR SAFETY IS IMPORTANT TO YOU AND TO OTHERS. Read and follow all instructions. Place instructions in a safe place for future reference. Do not allow anyone who has not read these instructions to assemble, light, adjust or operate the heater. www.enerco.com 888-849-1899 36880...
  • Page 2 • Refer to GENERAL SAFETY instructions could result INSIDE. INSTRUCTIONS for more in fire or explosion, which specific requirements could cause property NOTICE: regarding adequate damage, personal injury, or combustion and ventilation Not for use in a “dwelling home” death. air (page 3). in California. Enerco | Catalytic Heater Operating Instructions and Owner’s Manual...
  • Page 3 Sides 2” 2” 2” • If the protective grill is removed for servicing, it must be replaced prior to Rear 0” 0” 0” operating the heater. Floor (Wall Mount) 2” 2” 2” Floor (With Feet) Enerco | Catalytic Heater Operating Instructions and Owner’s Manual...
  • Page 4 • Learn to recognize the odor of propane (LP) gas. Local propane (LP) gas dealers will be more than happy to give you a scratch and sniff pamphlet. Use it to become familiar with the fuel gas odor. Enerco | Catalytic Heater Operating Instructions and Owner’s Manual...
  • Page 5 MHCAT8LP 5000 a professional service person. • WARNING: Any change to this Table 1 heater or its controls or attempts to clean the catalytic pad can be dangerous. Enerco | Catalytic Heater Operating Instructions and Owner’s Manual...
  • Page 6 OVERTIGHTEN. See Figure 4B. Wall Installation Your heater may be installed in a variety Footpads of fixed locations and is supplied with the necessary fasteners for mounting your heater on a wall. Figure 4 Enerco | Catalytic Heater Operating Instructions and Owner’s Manual...
  • Page 7 Find out if thoroughly cool before storing. the gas is available at the heater and check the propane (LP) gas regulator CAUTION: Do not cover the heater for correct manifold pressure. while it is hot. Enerco | Catalytic Heater Operating Instructions and Owner’s Manual...
  • Page 8 If the pad does become punctured, the Screw burner assembly must be replaced. 7. Remove the (4) four screws connecting Figure 9 the burner to the back of the heater. See Figure 8. Figure 6 Enerco | Catalytic Heater Operating Instructions and Owner’s Manual...
  • Page 9 6. Replace components as needed and reassemble. Be sure to check gas Figure 13 connections with a mild soap water solution upon lighting. 7. Repeat Steps 1-4 in reverse order to install the control bracket assembly. Enerco | Catalytic Heater Operating Instructions and Owner’s Manual...
  • Page 10 WARNING: Never attempt to use a catalytic pad with a damaged or perforated surface. Enerco | Catalytic Heater Operating Instructions and Owner’s Manual...
  • Page 11 2. S ee General Safety Instructions for opening size. 3. Tip over switch activated from bumping heater. 3. Re-light. 4. Regulator is defective. 4. Replace hose/regulator assembly. 5. Internal valve contamination. 5. Replace control valve. Enerco | Catalytic Heater Operating Instructions and Owner’s Manual...
  • Page 12 36830 36831 Dust Shield Cover 36856 36856 36856 Inlet Tubing 36853 36854 36855 Burner Tubing 36850 36851 36852 Pilot Tubing 73404 73404 73404 ODS Pilot 73403 73403 73403 Tipover Switch 32054 32054 32054 Control Valve Enerco | Catalytic Heater Operating Instructions and Owner’s Manual...
  • Page 13 NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! NOTES: Enerco | Catalytic Heater Operating Instructions and Owner’s Manual...
  • Page 14 Enerco Group, Inc. warrants its heaters and accessories to be free from defects in material and workmanship for a period of 1 year from date of purchase. Enerco Group, Inc. will repair or replace this product free of charge if it has been proven to be defective within the 1-year period, and is returned at customer expense with proof of purchase to Enerco Group, Inc.
  • Page 15 Debe suministrarse el aire necesario para la ventilación y la combustión. Ver página 3. LEA CUIDADOSAMENTE LAS INSTRUCCIONES: SU SEGURIDAD ES IMPORTANTE PARA USTED Y PARA LOS DEMÁS. Lea y siga todas las instrucciones. Conserve estas instrucciones en un lugar seguro para futura referencia. No permita que nadie que no haya leído estas instrucciones arme, encienda, ajuste o use el calefactor. www.enerco.com 888-849-1899 36880...
  • Page 16 AVISO: y a la ventilación adecuados daños materiales, heridas No apto para usar en una “casa de (página 3). graves o la muerte. vivienda” en California. Enerco | Calefactor catalítico Instrucciones de uso y manual del usuario...
  • Page 17 • NO use este calefactor si alguna de las piezas ha estado bajo el agua. Contáctese de inmediato con un técnico Enerco | Calefactor catalítico Instrucciones de uso y manual del usuario...
  • Page 18 • La sustancia aromática presente en el gas propano (LP) es incolora y la intensidad de su olor puede desvanecerse en algunas circunstancias. Enerco | Calefactor catalítico Instrucciones de uso y manual del usuario...
  • Page 19 MHCAT6LP 6000 encuentre el calefactor. MHCAT6LP 4000 • No coloque ropa u otro material MHCAT8LP 8000 combustible sobre o cerca del MHCAT8LP 5000 calefactor. Tabla 1 Enerco | Calefactor catalítico Instrucciones de uso y manual del usuario...
  • Page 20 Si presenta abrasión para espacio entre agujeros y piso mínimo o desgaste excesivos, o si la manguera espacio libre para cada calentador. está cortada, reemplácela con una de las mangueras Enerco indicada anteriormente ECAT3LP ECAT6LP ECAT8LP antes de utilizar el calefactor.
  • Page 21 (LP) tenga la CUIDADO: No cubra el calefactor presión correcta en el múltiple. mientras esté caliente. Enerco | Calefactor catalítico Instrucciones de uso y manual del usuario...
  • Page 22 Si la almohadilla se perfora, deberá reemplazar todo el quemador. Figura 9 7. Remueva los (4) cuatro tornillos que conectan el quemador a la parte posterior del calefactor. Consulte la Figura 8. Figura 6 Enerco | Calefactor catalítico Instrucciones de uso y manual del usuario...
  • Page 23 • Para remover la válvula, el ODS o el interruptor contra caídas, remueva los tornillos que los conectan al soporte de control. Remueva los cables de la Figura 13 termocupla y del encendido cuando sea necesario. Enerco | Calefactor catalítico Instrucciones de uso y manual del usuario...
  • Page 24 Enerco | Calefactor catalítico Instrucciones de uso y manual del usuario...
  • Page 25 3. Interruptor contra caídas activado por golpear el calefactor. 3. Vuelva a encenderlo. 4. El regulador está defectuoso. 4. Reemplace la manguera/regulador. 5. Contaminación de la válvula interna. 5. Reemplace la válvula de control. Enerco | Calefactor catalítico Instrucciones de uso y manual del usuario...
  • Page 26 36853 36854 36855 Tubo de quemador 36850 36851 36852 Tubo del piloto 73404 73404 73404 ODS, piloto 73403 73403 73403 Interruptor contra caídas 32054 32054 32054 Válvula de control Enerco | Calefactor catalítico Instrucciones de uso y manual del usuario...
  • Page 27 NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! ¡NUNCA DEJE EL CALEFACTOR DESATENDIDO MIENTRAS ESTÉ ENCENDIDO! NOTAS: Enerco | Calefactor catalítico Instrucciones de uso y manual del usuario...
  • Page 28 GARANTÍA LIMITADA Enerco Group, Inc. garantiza la calidad del material y la fabricación de sus calefactores y accesorios por un período de 1 año a partir de la fecha de compra. Enerco Group, Inc. reparará o reemplazará este producto sin cargo si presentara desperfectos dentro del primer año tras realizada la compra, siempre y cuando el cliente costee la devolución y presente el comprobante de...

This manual is also suitable for:

Ecat3lpEcat6lpEcat8lp