Spark Plug Inspection - Echo BEAR CAT EGI-2000 Operation Manual

SPARK PLUG INSPECTION

SPARK PLUG INSPECTION
28
maIntEnancE
Inverter Generator Owner's Manual
The spark plug is important engine
components, which should be
checked periodically.
The spark plug is important engine
1. Remove the cap
plug cap
②,
components, which should be checked
through the hole from the outside
periodically.
of the cover.
1. Remove the cap (1) and spark plug cap
2. Insert the handlebar
tool and turn it
④
(2). Insert the tool (4) through the hole
counterclockwise to remove the
from the outside of the cover.
spark plug.
2. Insert the handlebar (3) in to the tool (4)
3. Check for discoloration and
remove any carbon deposits.
and turn it counterclockwise to remove
The porcelain insulator around
the spark plug.
the center electrode of spark
3. Check for discoloration and remove any
plug should be a medium to
light tan color.
carbon deposits. The porcelain insulator
4. Check the spark plug type and gap.
around the center electrode of spark plug
Standard spark plug:
should be a medium to light tan color.
E6TC/E6RTC
4. Check the spark plug type and gap.
BP6HS / BPR6HS (NGK)
L87YC /R L87YC (CHAMPION)
Standard spark plug: E6TC/E6RTC
W16FP / W16FPR (DENSO)
BP6HS / BPR6HS (NGK) L87YC /R
W6BC / WR6BC (BOSCH)
L87YC (CHAMPION) W16FP / W16FPR
If needing EMC Certification,
engine must use E6RTC
(DENSO) W6BC / WR6BC (BOSCH) If
spark plug
needing EMC Certification, engine must
Gap: 0.6-0.7mm (0.024-0.028in)
use E6RTC spark plug Gap: 0.6-0.7mm
5. Install the spark plug.
(0.024-0.028in)
Torque: 20.0 N.m
5. Install the spark plug. (Torque: 20.0 N.m)
TIP:
TIP: If a torque wrench is not available
If a torque wrench is not
when installing a spark plug, a good
available when installing a
estimate of the correct torque is 1/4-1/2
spark plug, a good estimate of
the correct torque is 1/4-1/2
turn past finger tight. However, the spark
turn past finger tight. However,
plug should be tightened to the specified
the spark plug should be
tightened to the specified
torque as soon as possible.
torque as soon as possible.
6. Install the spark plug cap and spark
6. Install the spark plug cap and
spark plug cover. plug cover.
Maintenance
and spark
①
Insert the tool
④
in to the
③
CARBURETOR
The carburetor i
dealer with the p
do so properly.
ENGINE OIL R
27