Table of Contents
Advertisement
e
DC PROTECTOR
he
t. If
st
• Reduce the load of the connected electric device below the
specified rated output of the generator if the DC protector turns off.
s
If the DC protector turns off again, stop using the device immediately
and consult a franchised dealer.
FREQUENCY SELECTION (FS) SWITCH
ONLY FOR 100V PRODUCT
FREQUENCY SELECTION
FREQUENCY SELECTION
50Hz
50Hz
• Frequency switch can change frequency only when the generator set-
ting stops. The generator setting output frequency can't change
if it operates.
ENGINE SMART CONTROL
14
14
DC protector
control functIon
The DC protector turns to "OFF"
automatically when electric device being
connected to the generator is operating
and current above the rated flows. To use
this equipment again, turn on DC
The DC protector turns to "OFF" automatically
protector by pressing its button to "ON"
when electric device being connected to the
"ON" Direct current is output.
generator is operating and current above the
"OFF" Direct current is not output.
rated flows. To use this equipment again, turn
on DC protector by pressing its button to "ON".
NOTICE
1. "ON" Direct current is output.
2. "OFF" Direct current is not output.
Inverter Generator Owner's Manual
Inverter Generator Owner's Manual
Frequency selection (FS) switch
Only for 100V product
Frequency selection (FS) switch
Only for 100V product
50Hz
60Hz
50Hz
If you need change the machine output
60Hz
frequency please stop the generating
1. 50Hz
If you need change the machine output
set firstly then adjust the position of
2. 60Hz
frequency please stop the generating
frequency switch by screwdriver. Then
If you need change the machine output
set firstly then adjust the position of
restart it.
frequency please stop the generating set firstly
60Hz
frequency switch by screwdriver. Then
NOTICE
then adjust the position of frequency switch by
restart it.
60Hz
screwdriver. Then restart it.
NOTICE
Engine smart control
Engine smart control
"ON"
When the ESC switch is turned to
"ON"
"ON", the economy control unit
controls the engine speed according to
When the ESC switch is turned to
1. "ON"
the connected load. The results are
"ON", the economy control unit
When the ESC switch is turned to "ON", the
controls the engine speed according to
better fuel consumption and less
economy control unit controls the engine speed
the connected load. The results are
noise.
according to the connected load. The results
better fuel consumption and less
"OFF"
noise.
are better fuel consumption and less noise.
When the ESC switch is turned to
2. "OFF"
"OFF", the engine runs at the rated
"OFF"
When the ESC switch is turned to
(5000r/min) Regard-less of whether is
When the ESC switch is turned to "OFF",
a load connected or not.
"OFF", the engine runs at the rated
the engine runs at the rated (5000r/min)
(5000r/min) Regard-less of whether is
Tip:
Regard-less of whether is a load connected
a load connected or not.
or not. The ESC must be turned to"OFF" when
Tip:
using electric devices that require a large
starting current, such as acompressor of a
submergible pump.
Reduce the load of the
connected electric device
below the specified rated
output of the generator if
Control Function
the DC protector turns off.
NOTICE
If the DC protector turns off
Control Function
again, stop using the
device immediately and
consult a
franchised dealer
，
，
，
，
Frequency switch can
change frequency only
when the generator setting
Frequency switch can
stops. The generator
change frequency only
setting output frequency
when the generator setting
can't change if it operates.
stops. The generator
NOTICE
setting output frequency
can't change if it operates.
The ESC must be turned to"OFF"
when using electric devices that
The ESC must be turned to"OFF"
require a large starting current, such
as acompressor of a submergible
when using electric devices that
pump.
require a large starting current, such
as acompressor of a submergible
pump.
.
①
.
13
13
Hide quick links:
Advertisement
Table of Contents
