Change The Sysadmin User Password - Lancope StealthWatch System Hardware Installation Manual

32
8. Continue with the next section,

Change the sysadmin User Password

To ensure that your network is secure, you should change the default sysadmin
password for appliances.
Note:
Be sure that you have logged in as sysadmin to begin this procedure.
To change the sysadmin password, complete the following steps:
1.
On the System Configuration menu, select Password and press Enter.
Important:
If you change the trusted hosts list from the defaults, you must make sure each
StealthWatch appliance is included in the trusted host list for every other
StealthWatch appliance in your deployment. Otherwise, the appliances will not be
able to communicate with each other.
"Connecting the Appliance to the
Installation
Network."