Table of Contents
Advertisement
The Gateway Address page opens with the default gateway server IP address.
6.
Do the following:
Accept the default value or enter a new one based on your environment.
Select OK, and then press Enter to continue.
The confirmation page opens.
7.
Review the information. Are the settings correct?
If yes, select Yes, and then press Enter to continue. The system restarts and
implements the changes. On completion, the Login page opens.
If no, select No to make corrections. The IP Address page opens so that you
can enter your changes. After the changes are made and you accept the
settings, the Restart page opens. Press Enter to implement your changes.
Installation
31
Advertisement
Table of Contents
