Table of Contents
Advertisement
26
FlowCollector 5000
Because the FlowCollector 5000 for NetFlow platform consists of two connected
servers the installation differs from other appliances. They are directly connected by a
10G SFP cable so that they function as a single appliance.
The image below shows the connection between the servers. The FlowCollector 5000
engine is above and the database is below.
Note:
The iDRAC
support it..
Use the supplied 10G SFP cable to connect these units at the port labeled eth2. Place
these servers adjacent, vertically, to each other in the rack in order for the 10G SFP
cable to reach.
Each server uses a 1G copper Ethernet port to be used as a Management Port. Each
server also has a dedicated iDRAC Enterprise port.
Two onboard ports that are not used. These should have a port cover installed to
discourage their use.
Enterprise
ports can be used, but Lancope does not
Installation
Advertisement
Table of Contents
