Changing The Default Ip Addresses - Lancope StealthWatch System Hardware Installation Manual

Changing the Default IP Addresses

Once you have connected to the appliance, you need to configure the IP addresses.
The appliances already have default IP addresses, but you should configure them to
suit your network.
1.
Log in to the System Configuration program by doing the following:
Type sysadmin, and then press Enter.
When the password prompt appears, type lan1cope, and then press Enter.
At the next prompt, type SystemConfig, and then press Enter.
The System Configuration menu opens.
2.
Select Management, and then press Enter. The IP Address page opens.
3.
Do the following:
Installation 29