Backing Up Data; Backing Up To An Sd Card; Loading Backup Data From An Sd Card - Roland V-Drums TD-27 Quick Start Manual

Backing Up Data

All settings stored in the TD-27 can be saved (backed up) to
an SD card, or restored (loaded) into the TD-27.
MEMO
You can also back up and load individual drum kits.
details, refer to "Reference Manual" (PDF).

Backing Up to an SD Card

Here's how to save all settings that are stored in the TD-27
(up to 99 sets).
1.
Insert an SD card into the TD-27 (p. 7).
2.
Press the [SYSTEM] button.
The SYSTEM screen appears.
3.
Use the cursor buttons to select "SD CARD,"
and press [ENTER] button.
The SD CARD MENU screen appears.
4.
Use the cursor buttons to select "SAVE," and
press [ENTER] button.
5.
Make backup settings.
Parameter Explanation
Choose whether the user samples will
With User Sample
be backed up.
Bank Number Select the backup number.
* If you back up user samples as well, it may take several
minutes to save the data depending on the size of the
user samples. If you don't back up user samples, and
you then delete user samples or renumber them, the
kit won't be reproduced correctly even if you load the
backup.
6.
Press the [F5] (SAVE) button.
MEMO
If you want to assign a name to the backup data, press
the [F4] (NAME) button and assign a name.
7.
Press the [F5] (EXECUTE) button.
A confirmation message appears.
For
If you decide to cancel, select "CANCEL" and press the
[ENTER] button.
8.
Use the cursor buttons to select "OK," and
press the [ENTER] button.
The settings are saved in the SD card.

Loading Backup Data from an SD Card

Here's how backup data that was saved on an SD card can
be loaded into the TD-27.
1.
Insert an SD card into the TD-27 (p. 7).
2.
Press the [SYSTEM] button.
The SYSTEM screen appears.
3.
Use the cursor buttons to select "SD CARD,"
and press [ENTER] button.
The SD CARD MENU screen appears.
4.
Use the cursor buttons to select "LOAD," and
press [ENTER] button.
The SD CARD LOAD <BACKUP ALL> screen appears.
5.
Make load settings.
Parameter
With User Sample
Bank Number
* When you load user samples, all user samples in the TD-27
are deleted. Depending on the size of the user samples,
it may take more than ten minutes to load the data.
6.
Press the [F5] (LOAD) button.
A confirmation message appears.
If you decide to cancel, select "CANCEL" and press the
[ENTER] button.
Various Settings (SYSTEM)
Explanation
Choose whether the user samples will
be loaded.
Select the backup number.
25