Weekly Programmer Clock Instructions; Description; Operating Instructions; Setting The Current Day And Time - A2B Accorroni HUB RADIATOR MINI 6.0 Technical Information

16. PROGRAMMER CLOCK INSTRUCTIONS
WEEKLY

16.1 DESCRIPTION

The programmer is equipped inside with a
rechargeable lithium battery that allows you to
save time and schedule for about 5 years,
even without mains power supply. During the
normal operation, the display shows the day
of the week and the current time, in addition to the
status of operation in which the presence of the
symbol of a light bulb indicates that the appliance is
switched on.

16.2 OPERATING INSTRUCTIONS

The functions of the keys, with reference to fig. 9, are
the following:
1) Time setting:
Press the clock symbol at the same time as
symbol D +, to adjust the day of the week.
To set the time, press the clock button
simultaneously with H +.
To set the minute, press clock
simultaneously with M +.
2) Gear / programming switch: Press
the "MANUAL" button to switch between the
position "ON" "AUTO" and "OFF".
3) Key "P" for selecting the programs of
Power on / off.
4) "H +" button for progress and time selection.
5) "M +" button for advancement and selection of
minutes.
6) Key "D +" of progress and selection of days
Weekly.
7) Key to change the time and day of
week and to return to the current time when you are
in "PROGRAMMING" mode.
16.3 SETTING THE DAY AND THE HOUR
CURRENT
To allow the correct operation of the
programmer must set day and time
currents acting as follows:
a) to set the correct day, press
simultaneously the clock
symbol D +
b) to set the correct time press
simultaneously the clock symbol and the
symbol H +
c) to set the correct minute press
simultaneously the clock symbol and the
symbol M +
symbol and the
16.4.1 To facilitate programming, if yes want to adopt
identical operating times for several days of the week,
they are available some combinations of days for the
repetition of the program set, according to the
following scheme:
- a different program for each day of the week (the
day to be programmed appears highlighted on the
display mo-tu-we-thecc.)
- the same program for the days from Monday to
Friday
- the same weekend program in the Saturday and
Sunday days the same program for the days from
Monday to Saturday the same program for all days of
week
16.4.2 To proceed with programming of the radiator
operating intervals act as follows:
a) pressing the P key, the display shows 1 on;
b) by pressing the D + key you can select the day of
activation;
c) to set the activation time press the button H +;
d) to set the minute of activation press the M + button;
e) by pressing the P button on the display again
1 off appears;
f) by pressing the D + key you can select the day of
deactivation;
g) to set the deactivation time, press the H + key
h) to set the minute of deactivation press the M + key
It is possible to set up to 16 ignitions e daily
shutdowns by repeating the settings from point "a" up
to point "h".
If you do not operate on the keys within 10 seconds
the display returns to the main screen.

16.4 PROGRAMMING

16 programs are available, including 16 on and 16 off

16.5 MANUAL OPERATION

Through simple commands it is possible, without
change the programming, start the appliance
when the program itself instead provides the status
off or vice versa, proceeding as follows:
By pressing the manual key you can switch setting
off, auto, and on (operation manual).
Fig. 9
35