Warnings; Qualification Of The Installer; Preliminary Information; Transport And Handling - A2B Accorroni HUB RADIATOR MINI 6.0 Technical Information

10. WARNINGS

10.1 QUALIFICATION OF THE INSTALLER

WARNING! It is required by current legislation
on the subject (law 5 March 1990 n. 46 and relative
Implementation regulation) that the installation
is carried out by a qualified company in a position
to ensure, as well as the correct realization
of the plant, even the necessary checks first
of commissioning.

10.2 PRELIMINARY INFORMATION

Before starting the installation it is necessary to make
sure that the planning and design phases have been
completed obtaining authorizations possibly
necessary (ex: local authorities - Municipality, etc.), in
addition to the appropriate technical checks (for
example: evaluation of acoustic impact).
It is recommended for the purpose of relying on a
qualified heating technician who guarantees the
correct performance
phases, whether optional
or mandatory.

10.3 TRANSPORT AND HANDLING

The appliance is shipped on a wooden pallet,
with cardboard and plastic material protections.
The appliance can be moved aside
of personnel adequately equipped and with
equipment suitable for the weight of the product, such
as forklift or pallet truck, taking care of
distribute the weight on the supports, which is
unbalanced towards
connections side).
Any lifting using belts or ropes it can be carried out by
constraining the two-tube ropes sturdy metal inserted
in the existing crosspieces under the base of the
machine.
Secure the ropes at the anchor points to the pipes by
means of suitable fasteners or safety pins;
protect with cardboard or other suitable material
the contact points between the ropes and the device.
Upon delivery, check that during transport has not
been damaged visible on the packaging and / or on
the appliance. In case notice of damage, report
immediately formal complaint to the shipper. Do not
install appliances damaged in transport.
It is forbidden to disperse the parts in the environment
packaging, or leave them within the reach of children
as a potential source of danger.
of the aforementioned
the compressor

10.4 USE OF INSTRUCTIONS

This manual is an integral part of the product and
must be delivered to the owner of the appliance so
that it is kept carefully for any future use or for
consultation.
WARNING! When installing or work on the device,
observe all the instructions in this manual e the other
applicable to the product, according to the national
safety standards. The modifications of the
connections of any kind and / or failure to comply of
these instructions cause immediate damage
forfeiture of guarantee and liability of the producer.

10.5 GENERAL SYSTEM CHECKS

WARNING! Before filling the system
make sure that the pipes do not
contain foreign material, such as sand,
slag, flakes of rust and whatever else, can
damage the exchanger. It is a good rule
carry out the washing of the system, by-passing
the unit, before filling the same.
Load the system, taking care of it to check the
opening of the interception valves and closing the
system drain cock.
WARNING!
- Connect the indoor unit first and then the external
unit, fixing firmly piping.
- Make sure the drain is not loose.
- Ensure that the auxiliary lines are been isolated.
- Make sure the drain flows out correctly. Fix the
drain to the others pipes.
- Do not let the power cables come into
contact with the pipes.
(water
- Install motorized valves in the system
of area to prevent the water contained
in the accumulation do not circulate freely when
it is not necessary, that is when there is no
consent from thermoregulation.
26