Spare Battery; To Use The Spare Battery In Headset; Connecting Mobile To Headset - Plantronics Savi W745 Complete Overview

Multi device wireless headset system by nemsys

Hide thumbs Also See for Savi W745:

Spare Battery

The headset does not need to be docked for the spare battery to charge



Step 1: Open the battery compartment door on the side of

the charging cradle, by pressing the handle down and remove

the battery.



Step 2: Slide the battery off the headset to disconnect.



Step 3: Slide the charged battery on the headset until you hear a click.



Step 4: Place the used battery in the battery compartment and close the

door.

 Step 1: Press and hold the Bluetooth pairing button

on the Save base for approx. 4 seconds, until the

indicator LED flashed blue and red. The base should

remain in this mode for 10 minutes; if it goes off,

you will need to press again

 Step 2: Place Bluetooth on mobile device into

search mode, select SAVI W745 from the list of

found devices.

 Step 3: If prompted for a passcode, type 0000.



Step 4: Bluetooth indicator on LED base will turn solid blue when base has

an active connection with the mobile phone.

Nemsys LLC : 122 S. St Clair, Toledo, Ohio 43604 : 419-243-3603 : www.nemsys.com

Savi745 Wireless Headset: A Complete Overview For Nemsys Conversation Clients

Table of Contents