Table of Contents
Advertisement
CLEANING & CARE
Regularly rinse the water tank with tap water. Empty the water tank after rinsing it.
Cleaning
1.
Set the steam control to 0, unplug the base and let the iron cool down. (Fig. 2)
2.
Pour any remaining water out of the water tank.
3.
Wipe flakes and any other deposits off the plate with a damp cloth and a non-
abrasive (liquid) cleaning agent.
Caution:
To keep the soleplate smooth, avoid hard contact with metal objects. Never use a
scouring pad, vinegar or other chemicals to clean the soleplate.
DescaleFunction
To prolong the lifetime of your appliance and to maintain good performance, it should be
descaled once every two weeks. If the water in your area isvery hard (i.e. when flakes come
out of the plate during ironing), use this function more frequently.
1.
Ensure the steam control is set to 0. (Fig. 2)
2.
Fill the water tank to the MAX indication. (Fig. 3)
Do not pour vinegar or other descaling agents into the water tank.
3.
Set the temperature dial to MAX.
4.
Plug in the power charging base, put the iron on the base and let the iron heat
up.(Fig. 6)
5.
Remove the iron when the power indicator light goes off. (Fig. 7)
6.
Hold the iron over the sink. Press the Descale button and hold it. (Fig. 12)
7.
Gently shake the iron while holding the steam control until all water in the water
tank has been used up. (Fig. 13)
8.
Set the steam control back to 0. (Fig. 2)
Caution:
While scale is flushed out, steam and boiling water also comes out of the plate.
Advertisement
Table of Contents
