Table of Contents
Advertisement
General Ironing
1.
Consult the table on the previous page to set the temperature dial to the
appropriate setting for your garment.(Fig. 4)
2.
Select a steam setting that corresponds to the temperature you have set. (Fig. 5)
3.
Place the iron on its power charging base and connect to a power socket. (Fig. 6)
Note:
Ensure the base sits on a stable and level surface. It is recommended to place the base
on the soft part of the ironing board.
4.
When the iron is first plugged in, the indicator lightwill flash red (Fig. 7-power
indicator light), indicating the iron's plate is heating up.The indicator light will turn
off when the plate is hot enough for ironing, so the iron can be removed from the
base to start ironing. (Fig. 8)
Spray Function
•
Press the spray button to moisten the garment to be ironed(Fig. 9).This helps remove
stubborn creases.
Steam Burst Function
•
Press and release the steam burst button for a powerful burst of steam (Fig. 10& 11).
•
For optimal performance, it is recommended to press the button in 5-second
intervals.
Dry Ironing
•
Set the steam control to position0 to iron without steam. (Fig. 2)
Advertisement
Table of Contents
