Table of Contents
Advertisement
CLEANING & CARE
Before cleaning the iron:
1.
Empty the water tank completely.
2.
Release any remaining steam from the iron by pressing the steam button.
3.
Turn off the iron.
4.
Unplug the device from the power outlet and allow it to cool down completely.
5.
Always place the iron on the base provided, as the non-slip pads are specifically
designed to withstand high temperatures.
6.
Neatly coil the power cord in the cord storage section of the base.
7.
Use a soft, damp cloth or sponge to gently wipe the exterior surfaces of the iron to
remove any dirt or residue. Avoid using abrasive or sharp objects to clean the
bottom of the iron, as this may cause damage to the device.
8.
To prolong the lifespan of your iron, it is recommended to regularly empty and
rinse the water tank to prevent the accumulation of deposits that could potentially
damage the device.
Self-Cleaning
This iron features a self-leaning function that removes limescale build-up and helps protect
the iron against calcification.
1.
Ensure the water tank is full.
2.
Place the iron sitting upright, in a safe position that will avoid exposure to hot
steam. Note: It is recommended to place the iron is a sink when using the self-
cleaning function.
3.
Once the iron has reached operating temperature, press and hold the Self-
cleaning "CLEAN" button for 3 seconds. The Self-cleaning indicator will flash and
the iron will 'BEEP' 3 times.
4.
After approximately 2 minutes, the iron will emit 3 beeps, indicating the self-clean
process is complete.
Advertisement
Table of Contents
