Table of Contents
Advertisement
After Descaling
1.
Put the iron on the charging base and let the iron heat up to dry the plate.
2.
Remove the iron from the base when the power indicator light goes off.
3.
Move the iron gently over a piece of cloth to remove any water stains on the
soleplate.
Storage
1.
Set the steam control back to 0. (Fig. 2)
2.
Pour out any remaining water from the water tank.
Do not pour vinegar or other descaling agents into the water tank.
3.
Unplug the power cord and retract it into the charging base(Fig. 14).
Remove iron from the power charging base when you retract the mains into the
base, as the soleplate could still be hot.
4.
Put the iron on the power charging base. Lock the iron to its base. (Fig. 15)
5.
Let the iron cool down before you store it.
The iron and charging base can be carried by the iron handle.
Advertisement
Table of Contents
