Table of Contents
Advertisement
After ironing
1. Place the iron securely on the stand.
2. Switch the appliance off.
3. Remove the mains plug from the wall socket and let the iron cool down.
Features
Vertical steaming
Never direct the steam at people.
● You can steam iron hanging curtains and clothes (jackets, suits, coats) by holding the iron in a
vertical position and pressing the steam activator.
Cleaning and maintenance
After each use
Never immerse the iron in water nor rinse it under the tap.
1. Clean the iron with a damp cloth.
2. Wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive
cleaning agent.
Calc Clean
Never remove the Calc-Clean rinsing cap or unscrew the Calc-Clean rinsing plug when the steam
tank is hot.
VERY IMPORTANT:
prevent damage to your iron.
The scale that develops inside the boiler will not deposit onto the walls. Just calc-clean the boiler
once or twice a month to keep your appliance in good condition.
1 Make sure that the steam tank has been unplugged for more than 2 hours and is not hot.
2 Remove the detachable water tank.
3 Hold the steam tank with both hands and shake well.
4 Turn the steam station on its side and remove the Calc-Clean rinsing cap & plug with a coin.
5
Empty the steam tank by pouring out the water into a sink.
6 Fill the boiler with fresh water by means of a cup and gently shake unit.
7 Empty the boiler by pouring out the water into a sink.
Repeat steps 6 & 7 twice to obtain the best result.
8
Put the Calc-Clean rinsing plug back into the steam tank and tighten it with a coin.
9
Put the Calc-Clean rinsing cap back onto the boiler.
Rinse the boiler once a month or after every 10 times of use to
Advertisement
Table of Contents
