Assembly (continued)
3
Attaching the bowl
□
Remove any remaining packaging from the table rim "D"
and the fire bowl "B".Clean out any remaining packaging
debris from the inside of the bowl.
□
Attach the control switch from the fire bowl to the left
panel "G" using the four bolts "DD" and metal washers
"FF". Tighten all the bolts using the Allen wrench "II".
Cover the bolts with the plastic bolt caps "GG".
□
Place the lava rock "L" in the fire bowl "B". Make sure it
is evenly distributed and does not block the burner holes.
□
Open the front panel "H" and attach it to the left panel
"G", using the chain "M".
4
Completing the assembly
□
Place the granite tops "C" into the table rim "D"
□
Place the cover "A" on the fire bowl "B" when not in use.
10