Advertisement
Quick Links
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Mercer Coffee Table
Stock # BH45-021-399-01
ADULT ASSEMBLY REQUIRED
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or e-mail your request to parts@whalenfurniture.com
Date 2015-12-11 Rev. 2 Factory: DOSHFO
1-866-942-5362
www.whalenstyle.com
LOT NUMBER:
DATE PURCHASED:
/
/
Advertisement
Related Manuals for Better Homes and Gardens Mercer Series
Summary of Contents for Better Homes and Gardens Mercer Series
- Page 1 LOT NUMBER: DATE PURCHASED: Mercer Coffee Table Stock # BH45-021-399-01 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 1-866-942-5362 Pacific Standard Time: 8:30 a.m.
- Page 2 M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Mercer Coffee Table (BH45-021-399-01) MADE IN CHINA MAXIMUM LOAD 200 lb.
- Page 3 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Top Panel ( Qty. 1) B- Bottom Shelf ( Qty. 1) C- Bottom Stretcher ( Qty. 2) D- Leg ( Qty.
- Page 4 Assembly Instructions Flat Washer 5/8” Bolt Lock Washer n this step) used i (8 used in this step) (8 used in this step) ① ③ ④ NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts.
- Page 5 Assembly Instructions Flat Washer 1-1/4” Bolt Lock Washer n this step) used i (4 used in this step) (4 used in this step) ③ ⑤ ④ 3. Position the Bottom Shelf (B) upside down on the carton or other support surface, as shown. NOTE: Place a protective cover (like the bubble wrap packing material) over the carton or other support surface to prevent from scratching.
- Page 6 Assembly Instructions Flat Washer 1-1/2” Bolt Lock Washer (6 used in this step) (6 used in this step) (6 used in this step) ③ ④ ② 5. Place the Top Panel (A) upside down on a level and protective surface with the threaded inserts facing up. 6.
- Page 7 Assembly Instructions 7. Go back and tighten all bolts with the enclosed Allen wrench. Ask for assistance to lift the assembled table upright and position it at the desired location. 8. If necessary, adjust the pre-attached floor levelers at the bottom of Legs (D) to level the unit. 1-866-942-5362 Please call for replacement parts or assistance: Page 7...
-
Page 8: Care And Maintenance
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish.