Download Print this page

GFI System SYNESTHESIA Manual page 6

Hide thumbs Also See for SYNESTHESIA:

Advertisement

05. Slow Volume 
       < Amplitude > 
This algorithm slows down the attack of the input signal's envelope, creating a 'volume swell' effect 
that is normally created using the guitar's volume knob or a volume pedal.  
 
One thing we discovered while designing this algorithm is that things get exponentially more inter‐
esting when we have echoes following this volume‐swelled sound. This combination produces huge 
layers of sound that fills up time and space. We have thus added a full‐featured echo effect in this 
algorithm.  
P R I M A R Y 
[ Speed ] = Echo Time  
                    Range : 0 to 1 second. 
[ Depth ] = Echo Level 
[ Tweak ] = Swell Time 
Controls the time it takes for the 
swell to reach maximum value. 
Setting the Threshold parameter 
When playing single‐notes phrases you will most likely set the 
quickly rising volume, in this case set 
 
When playing with long swell you set the 
ume, set 
Threshold
 
Is it possible to get only the Echo/Delay effect? 
Yes it's possible, simply set 
only the echo effect. Now you have a full‐featured echo algorithm which you can use stand 
alone, or paired with the other on‐board modulation algorithms. 
 
 
!
This algorithm creates the volume swell by detecting the onset/attack of the incoming signal, it 
works best with clean and precise single note picking or clean chord strum (not appregiated). 
Threshold
 high to get the best result. 
Swell Time 
 low for best result. 
parameter high to get slowly rising vol‐
Swell Time 
to zero, there will be no volume swells, and you get 
6
Algorithms Reference 
S Y N E S T H E S I A
(Firmware V2.0.x) 
Tap‐tempo / Midi Clock 
S E C O N D A R Y 
SP1 ‐ Echo Tone :  

Clear 

Warm 

Warmer 

Dark 
SP2 ‐ Echo Feedback : [0 ‐ 15] 
SP3 ‐ Threshold : [0 ‐ 7] 
 parameter low to get 
Swell Time
 
YES 

Advertisement

loading
Need help?

Need help?

Do you have a question about the SYNESTHESIA and is the answer not in the manual?