GFI System SYNESTHESIA Manual page 30

30. Drum (Rotary)
< Miscellaneous >
Added with firmware update v2.0.0
This algorithm makes up the 'Horn' part of the Rotary Speaker algorithm. It is meant to be used
in conjunction with the Drum algorithm (with Mixture dsp routing).
If you are wondering why we split the rotary algorithm into its Horn and Drum component please
read our explanation in the 'Firmware v2.0.0 Release Note.pdf' document.
P R I M A R Y
[ Speed ] = Low Speed
Sets the low‐speed of the rotor.
[ Depth ] = Fast Speed
Sets the fast‐speed of the rotor.
[ Tweak ] = Volume
parameter sets the rate of transition from Slow speed to Fast speed and vice
Acceleration
versa. 0 = slowest, 3 = fastest.
Tips :
1. Hold the A/Y or B/X switch for half a second to toggle the rotor speed, from Slow to Fast,
and vice versa . You can also use an Aux switch or Midi to toggle the rotor speed.
2. The Rotary Speaker algorithm sounds best when the speeds of the Horn and the Drum are
not so vastly different. Do not set the Horn's speed to fast while the Drum's speed is slow,
and vice versa.
3. Set to achieve the desired balance between Drum and Horn sound.
Volume
22
Algorithms Reference
S Y N E S T H E S I A
(Firmware V2.0.x)
Tap‐tempo / Midi Clock
NO
S E C O N D A R Y
SP1 ‐ Acceleration : [0 to 3]
SP2 ‐ Intensity : [0 to 3]
SP3 ‐ Pre‐Drive :

On

Off