GFI System SYNESTHESIA Manual page 3

02. Harmonic Tremolo
< Amplitude >
Harmonic tremolo splits the incoming signal into two frequency bands : Low‐band and High‐band,
then applies tremolo to the two bands in the opposite direction, that is, you hear the low‐band sig‐
nal and high‐band signal alternatingly. The resulting sound is a uniquely lush throbing vibe with a
touch of phasing.
To spice things up further, we've added a
quency at which the low‐band and the high‐band components intersect, this gives a wide ranging
tonal variety.
Finally, two 'vibe' modes : Subtle and Deep provide additional flexibility in shaping the harmonic
bliss. Oh hey, don't forget to try the stereo panning mode!
P R I M A R Y
Tremolo Speed (bpm)
Tremolo Depth
Sets the intensity of the tremolo
effect.
[ Tweak ] = Frequency
Controls the crossover frequency between
the Low band and the High band.
crossover frequency
Lo‐Band Hi‐Band
parameter which controls the center fre‐
Frequency
4
Algorithms Reference
S Y N E S T H E S I A
(Firmware V2.0.x)
Tap‐tempo / Midi Clock
YES
S E C O N D A R Y
SP1 ‐ Wave‐Shape :

Triangle

Sine

Sawtooth

Square
SP2 ‐ Panning :

Mono

Stereo
SP3 ‐ Vibe :

Subtle

Deep