Replacing The Power-Adapter Port; Procedure; Replacing The Display Assembly - Dell Inspiron 3782 Service Manual

Hide thumbs Also See for Inspiron 3782:

Service manual (99 pages)

Table Of Contents

Table of Contents

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your

working inside your

computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Procedure

1. Align the screw hole on the power-adapter port with the screw hole on the palm rest and keyboard assembly.

2. Replace the screw (M2x2) that secures the power-adapter port to the palm rest and keyboard assembly.

3. Route the power-adapter port cable through the routing guides on the palm rest and keyboard assembly.

4. Connect the power-adapter port cable to the system board.

5. Close the right hinge.

6. Replace the three screws (M2.5x5) that secure the right hinge to the system board and palm rest assembly.

Replacing the display assembly

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your

working inside your

computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Procedure

NOTE:

Ensure that the hinges are opened to the maximum before replacing the display assembly on palm-rest and

keyboard assembly.

1. Slide the palm-rest and keyboard assembly under the hinges on the display assembly and close it.