14. Close the right hinge.
15. Replace the three screws (M2.5x5) that secure the right hinge to the system board.
16. Slide the optical-drive connector board cable into the connector on the system board and close the latch.
17. Slide the optical-drive connector board cable into the connector on the optical-drive connector board and close the latch.
Post-requisites
1. Replace the
heat
sink.
2. Replace the
solid-state
3. Replace the
wireless
card.
4. Replace the
memory
modules.
5. Replace the battery.
drive.
Replacing the system board
73