Advertisement
WARNING: Rick of electric shock!!!,
Drain spa and disconnect power before attempting to open lens.
Multicolor LED spa lights allows the replacement of the lamp from the front.
It comes complete with a plastic insert tool for tightening, or un-tightening.
NOTE:
To change a bulb after installation,
follow the instruction engraved on the lamp replacement too.
Insert the two tabs of the insert tool into the two notches on
the front lens of the light assembly
(counter-clockwise to REMOVE; clockwise to INSTALL)
See figure 1.
MULTI-COLOR LED SPA LIGHT
(Instruction for LED Bulb replacement)
INSERT TOOL
1. Remove lens with tool (provided)
2. Pull bulb straight out
3. Gently push in new bulb (important)
4. Assure O ring is in place
5. Replace lens with tool
6. Tighten to align tool with notch
Figure 1
Insert Tool
Front Lens
Advertisement
