Advertisement
Lubrication
1) Turn off the main power
1) Open the screws (phillip+) or Open the zippers from the front of the chair
2) Apply lubrication onto circled area
Caution
Do not apply lubrication on dc-belt
BACK VIEW
DC-PULLEY
GEAR PULLEY
DC-BELT
DC-MOTOR
GEAR BOX
OIL RESERVOIR
AC MOTOR
MAIN SHAFT
If problem persists, contact your local distributor, or manufacturer with your serial number
It is strongly recommended that main shaft be lubricated in a proper way at least once a month
to ensure smooth operation
UPPER SENSOR
LOWER SENSOR
MAIN SHAFT
MAIN ON/OPF POWER SWITCH
FUSE
TRANSFORMER
PCB BOARD
REMOVE SCREWS (PHILLIP)
TO OPEN THE PANEL
IMPORTANT!!!
LUBRICATE ON CIRCLED AREA
MACHINERY OIL RECOMMENDED
16
FRONT VIEW
Zipper
When massage is not functional :
Always check your power source first
- check power cord
- check main on/off power switch
- check fuse/s
Advertisement
