Table of Contents
Advertisement
Electric Core Drill with Base
Safety
Read and understand all safety warnings before using the tool.
•
Avoid dangerous environments. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which may ignite dust or fumes.
•
Do not use this product if it is not completely assembled or if any parts appear to be missing or
damaged. Use of a product that is not properly and completely assembled could result in serious
personal injury.
•
Inspect the tool carefully to make sure no breakage or damaged occurred during shipping.
•
If any parts are damaged or missing do not operate this tool until the missing parts are replaced. Use of
this product with damaged or missing parts could result in serious personal injury.
•
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any
alteration or modification is misuse that will void product warranty and could result in a hazardous
condition leading to possible serious personal injury.
To prevent accidental starting that could cause injury, always disconnect the tool from the electrical
•
supply when assembling parts.
•
Keep the tool and all components away from children.
•
Keep children and bystanders away while operating power tools.
•
Keep the work area clean and well lit
•
Keep the tool pointed away from yourself and others at all times. Keep hands and body parts away from
moving parts and use safety guards.
•
Do not allow persons unfamiliar with the tool or its operation to use the tool.
•
Use safety equipment. Always wear eye and ear protection. Safety equipment such as dust mask, non-
skid safety shoes and hard hat should be used in appropriate conditions.
•
Only use parts and accessories recommended by manufacturer.
•
Do not modify any part of the tool or its safety mechanisms.
•
Do not use the tool outside of its operating parameters. For example, drilling extremely hard materials or
using large diameter drill bits.
•
Bits may become hot during use – wear suitable protective gloves when handling bits.
•
Never use the tool if the electrical cable is damaged in any way – have the cable replaced at an
authorised service centre.
•
Use extreme caution to avoid drilling into electrical cabling, gas or water pipes concealed in the work
area. Use suitable detection devices to help locate wiring / plumbing prior to starting work.
•
If drilling through ceilings or walls, secure the piece of material that will be cut out to prevent it falling.
•
Do NOT operate the tool in rain or wet conditions.
•
Do NOT leave the tool unattended while the motor is running.
•
Do NOT operate this machine if you are tired or fatigued or under the influence of alcohol, medication or
drugs.
•
Do NOT operate the tool if you are uncertain of how to use it correctly and safely.
•
Do NOT use the tool if it is malfunctioning, leaking water or any other fluid or is damaged in any way.
•
Do NOT allow electrical cords to be near or in any water.
•
Do NOT use this machine standing on a ladder.
•
Do NOT drill into materials that contain asbestos.
•
Do NOT touch rotating parts.
•
Do NOT allow minors or untrained persons to operate the tool.
•
If the machine stops for any reason, switch it OFF to avoid any sudden starts.
E&OE
©2017 Bäumr-AG
2
Advertisement
Table of Contents
