Table of Contents
Advertisement
Electric Core Drill with Base
Drill Bits
•
Drill bits with a 1-1/4" UNC female thread can be screwed directly to the tool
spindle.
•
Always use drill bits that are appropriate for the material you will be drilling.
You can extend the life of the tool by using drill bits that are not damaged or
deformed. Ensure that enough diamond is exposed in every segment of the
drill bit in order to make the drilling more effective.
•
The drill bit has a right-hand thread. Use a suitable spanner to hold the spindle
in place.
•
Never hit the drill bit in order to remove it as the drill bit or tool may be
damaged.
•
It is recommended to use grease the drill bit thread to make bit removal
easier.
E&OE
©2017 Bäumr-AG
7
Advertisement
Table of Contents
