Safety - Baumr-AG HD2 User Manual

20V Cordless Hammer Drill / Driver HD2

Safety

Read and understand all safety warnings before using the tool.
•
Avoid dangerous environments. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which may ignite dust or fumes.
•
Do not use this product if it is not completely assembled or if any parts appear to be missing or
damaged. Use of a product that is not properly and completely assembled could result in serious
personal injury.
•
Inspect the tool carefully to make sure no breakage or damaged occurred during shipping.
•
If any parts are damaged or missing do not operate this tool until the missing parts are replaced. Use of
this product with damaged or missing parts could result in serious personal injury.
•
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any
alteration or modification is misuse that will void product warranty and could result in a hazardous
condition leading to possible serious personal injury.
•
To prevent accidental starting that could cause injury, always remove the battery pack from the tool
when assembling parts.
•
Keep the tool and all components away from children.
•
Keep children and bystanders away while operating power tools.
•
Keep the work area clean and well lit
•
Keep the tool pointed away from yourself and others at all times. Keep hands and body parts away from
moving parts and use safety guards.
•
Do not allow persons unfamiliar with the tool or its operation to use the tool.
•
Use safety equipment. Always wear eye and ear protection. Safety equipment such as dust mask, non-
skid safety shoes and hard hat should be used in appropriate conditions.
•
Only use parts and accessories recommended by manufacturer.
•
Do not modify any part of the tool or its safety mechanisms.
•
Do not use in ambient temperatures above 40°C (104°F).
•
Do not use the tool outside of its operating parameters. For example, drilling extremely hard materials or
using large diameter drill bits.
•
Bits may become hot during use – wear suitable protective gloves when handling bits.
Battery and Charging Safety
•
Use only with the batteries and battery charger specified by the manufacturer.
•
Do not open the battery – danger of short-circuiting.
•
Do not attempt to destroy or disassemble battery pack or remove any of its components.
•
Do not touch the battery terminals with metal objects and/or body parts as short-circuit and/or personal
injury may result.
•
Explosion hazard – protect the battery against heat; for example, direct sunlight and fire.
•
Explosion hazard – do not short-circuit the battery.
E&OE © 2017 Bäumr-AG 2