ZWO ASIAIR PRO User Manual page 17

After completing the configuration of the bridge mode, you can switch between
multiple devices in the home LAN. Soft shutdown provides a safe soft shutdown of
ASIAIR Pro.
Shut down the ASIAIR device and exit the app, please wait for 5-10s before
disconnecting the power of the ASIAIR PRO.
Main Camera Settings
Select the main camera and slide the slider switch to the right to connect it.
When switching cameras, please set the switch to off first, and then change
camera, followed by sliding the slider switch on again. If the camera is a cooled
camera that has a built in TEC cooling feature, you can turn on the cooling and
set the target cooling temperature. In addition some cameras also have heating
and antidew functions.
To use a DSLR camera as the main camera please refer to the "DSLR Camera
Connection" section for the DSLR camera models supported by ASIAIR. For
models that do not support long exposure, you need to use the shutter release
connection.
It is recommended to open the advanced settings, which includes Histogram,
Automatic White Balance, Mono Bin, Continuous Preview, etc.
13