Download Print this page

ZWO ASIAIR PRO How To Use

With sky-watcher az-gti mount

Hide thumbs Also See for ASIAIR PRO:

Download this manual

ZWO ASIAIR FAQ

How to use ASIAIR with Sky-Watcher

AZ-GTi Mount

1 Preparations

1.1 Devices:

ASIAIR

PRO, AZ-GTi.

1.2 Apps: ASIAIR and SynScan Pro from App Store or Google Play.

1.3 A FTDI USB Cable, such as the

Lynx Astro FTDI EQDIR USB Adapter

for Skywatcher

AZGTi. (Optional)

2 Connections

There are two ways you can control AZ-GTi mount with ASIAIR, Wireless

and Wired.

2.1 Wireless

Switch ASIAIR to 2.4G WiFi in ASIAIR app.

⚫

Page 1 ZWO ASIAIR FAQ How to use ASIAIR with Sky-Watcher AZ-GTi Mount 1 Preparations 1.1 Devices: ASIAIR PRO, AZ-GTi. 1.2 Apps: ASIAIR and SynScan Pro from App Store or Google Play. 1.3 A FTDI USB Cable, such as the Lynx Astro FTDI EQDIR USB Adapter for Skywatcher AZGTi.
Page 2 ZWO ASIAIR FAQ Go to Connect - Settings - Wi-Fi Setting in SynScan Pro app, then ⚫ enter like below. The SSID depends on your ASIAIR Hotspot name. Back to ASIAIR app and select EQMod Mount driver in Telescope Settings page. The IP address is the same as above step which is...
Page 3 ZWO ASIAIR FAQ 2.1 Wired Using a FTDI USB Cable is the simplest and most reliable way to connect, and allows the ASIAIR to operate wirelessly with your iPad/Android device using the much faster 5G WiFi. A FTDI USB Cable, sometimes called an EQMOD, or EQDIR cable can also be made DIY.