Mount Connection Via Network - ZWO ASIAIR PRO User Manual

Mount Connection via Network

1.Connecting via WiFi
Some mounts now have built-in WiFi modules or provided an an external WiFi
accessories, such as A Z-GTi with SynScan WiFi module, StarFi Wi-Fi Adapter, SkyPor-
tal WiFi Module, StarGo WiFi mode, PMC-8 Wi-Fi mode etc.
For a detailed description of ASIAIR PRO connections, please refer to the
relevant documents on the support page of ZWO official website.
2. Network Cable Connection
This method is mainly aimed at Vixen's StarBook series control system, including
StarBook, StarBook One, StarBook-S, StarBook Ten, etc. Specific steps are as follows:
① Power on the StarBook control system .
② Directly connect the ASIAIR PRO and StarBook control systems via an RJ45
standard (Crystal connector is also in A or B mode).
③ Open the ASIAIR App， select wired ethernet on the connection settings page,
aet to automatically obtain an IP address.
④ Select the corresponding StarBook control system option and fill in the
StarBook control system IP in the IP input box (obtained at "Menu-About LAN")
for example 169.254.0.1, port 80.
If the ASIAIR prompts that the connection failed reconfirm on the 'About LAN'
page in the StarBook, that it obtained an IP address.
EQ Mount
RJ45 Cable
EQ Mount
ASIAIR PRO
ASIAIR PRO
08