ASI533 Manual Revision 1.0 Nov, 2019 All material in this publication is subject to change without notice and its copyright totally belongs to Suzhou ZWO CO.,LTD.
ASI533 Manual 1. Instruction Congratulations and thank you for buying one of our ASI Cameras! This manual will give you a brief introduction to your ASI camera. Please take the time to read it thoroughly, if you have any questions, feel free to contact us: info@zwoptical.com. The ASI533 camera is specifically designed with astrophotography in mind.
ASI533 Manual 2. Camera technical specifications Sensor SONY IMX533CMOS Diagonal 15.968mm 9 Mega Pixels Resolution 3008*3008 Pixel size 3.76µm Image area 11.31*11.31mm Max FPS at full resolution 20FPS Shutter Rolling Shutter 32μs~2000s Exposure Range Read noise 1.0-3.8e QE peak Full well 50,000e 14bit DDR3 buffer...
ASI533 Manual 3. QE Value & Read Noise The QE value and readout noise are the most important parameters to measure camera performance. Higher QE and lower readout noise are necessary to improve the image signal-to-noise ratio. We suppose the QE peak of ASI533 is above 80%. Readout noise includes pixel noise, circuit noise, and ADC quantization noise.
ASI533 Manual 4. Getting to know your camera 5.1 External View 1. Protective window, AR anti-reflection film D32*2mm 2. 2′′ M42 thread, thickness 11mm, removable 3. Radiator 4. USB2.0Hub 5. USB3.0/USB2.0 data interface 6. Led indicator 7. Cooling power supply DC power port: size 5.5*2.1mm, inside and outside negative, it is recommended to use 12V at 3A power supply 8.
ASI533 Manual 5.2 Power consumption ASI cameras are low-power are low power, using around 300ma at 5V, and the camera is powered by a USB cable when not cooling. However, if you are cooling, you need to use a 12V at 3A power adapter (D5.5*2.1mm, center positive) or a lithium battery (supporting a wide range of 9V to 15V) to power the fans.
ASI533 Manual 5.3 Cooling system The ASI533 2-stage TEC cooling system precisely controls the temperature of the sensor. Unlike traditional CCDs, the ASI533 camera features ultra-low readout noise, efficient cooling, and adjustable gain. This eliminates the need for ultra-long exposures to capture targets, dramatically reducing the need for photographic systems and guide systems.
ASI533 Manual 5.5 Protect Window In front of the ASI533 camera sensor there is an AR coated protection window with a diameter of 32mm and a thickness of 2mm. 5.6 Analog to Digital Converter (ADC) The ASI533 camera has a built-in 14bit ADC. The ASI533 also supports a custom ROI local readout mode with faster frame rates at small ROI resolutions.
ASI533 Manual reading speed. The key difference between “Cool” and “Pro” model ASI cameras is that the Pro models have this built-in DDR memory buffer. 5. How to use your camera The ASI533 can be connected to a telescope or camera lens via the necessary adapters. Most of the commonly needed adapters are already included and the rest can be purchased directly from our website: https://astronomy-imaging-camera.com/...
ASI533 Manual 6. Cleaning The camera is equipped with a protective window glass. The inside of the sensor is dry and sealed. We do not recommend opening the camera to clean it. Opening the camera may cause the sensor room to get wet and condensation may occur during cooling. If you need to clean the protective glass, it is best during the day.
ASI533 Manual 8. Servicing For software upgrades, please go directly to the following official website to download updates: https://astronomy-imaging-camera.com/software-drivers For repairs and other services, please contact us via email: info@zwoptical.com For cameras purchased from agents, please contact your dealer for after-sales service. 9.