FT165.C
Note: Install Base Cover with Filler where a run of Frames with Base Covers meet
with Raised Frames.
C
B
1. Assemble Base Filler (B) to Base Filler Support (C) with 2 Screws (D).
Base Cover
Z
© 2017 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z and Canvas Office Landscape are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
D
D
D
1
2
1. Open Base Cover and slide Base Filler
Support (C) into top flange of Cover.
2. Secure in place with 2 Screws (D).
Note: The Filler should fit tight against
Cover.
Part no. 1b2t8v rev F.
5