HermanMiller Canvas Office Landscape Installation And Disassembly For Recycling Instructions page 3

FT165.E
Note: Install Base Cover with Filler where a end of run of Frames with Base Covers
meet with Raised Frames.
Raised Frame
C
A
1. Assemble Base Filler (A) to Base Filler Support (C) with 2 Screws (D). Use outside
screw hole whether Filler is mounted on right side or left side of support.
Z
© 2017 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z and Canvas Office Landscape are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Frame With
Base Cover
D
FT165.E
1
Raised Frame
C
D
A
Part no. 1b2t8v rev F.
3