Advertisement
Available languages
Available languages
ENGLISH
FUNCTIONS
1. POWER button
2. LED indicators
3. Micro-USB (only charging)
4. USB (only supply power)
OPERATING INSTRUCTIONS
Use either the micro-USB cable that
comes packaged with this product,
or a high-performance USB travel
charging cable.
CHARGING POWER BANK
— Connect the micro-USB cable
end to the powerbank first and
then connect the USB-cable to a
USB-charger or USB-outlet that
can provide sufficient power to
charge the powerbank.
The LED indicators will display the
charging status.
SUPPLY POWER TO DEVICES
— Connect the USB cable end to the
powerbank first and then connect
the USB-cable to your device you
want to charge.
— The LED indicators will display
the remaining charge in the
power bank during discharging.
CHECK POWER STATUS
— Push and hold the POWER-button
and the LED indicators will light
up and indicate the remaining
power status.
— The power bank will detect a
connected device and start
charging automatically.
— If the USB cable not is
disconnected while charging
process finishes, push POWER-
button first to start charging.
NOTE:
Be sure to check the orientation of
the terminal before connecting,
Connecting incorrectly may damage
the connector.
GOOD TO KNOW
— It is normal for the battery pack
to become hot during charging
and it will gradually cool down
after charging.
— Charging time may vary
depending on remaining charge,
battery age and ambient
temperature.
— Battery pack storage
temperature: -20°C to 25°C.
— Charger operation temperature:
0°C to 45°C.
— Disconnect the power bank from
the power outlet before cleaning
or when it is not used.
Use damp cloth when cleaning the
power bank. Do not immerse into
water.
4
Advertisement
