Maxcom MS453 User Manual page 10

Table of Contents

Advertisement

display advising you to charge the battery. To charge the
battery, plug the charger into a power outlet and into the
phone.
Remember! Be careful while plugging the charger jack into
the USB socket. Improper plugging might seriously damage
the device, and such a damage is not covered under warranty.
Remember! If you use chargers from other manufacturers
make sure such a charger has a microUSB slot.
The icon on the display ( ) informs you about current level
of battery charge.
Charging the battery to full takes about 2-3 hours. You can use
the device while charging, but doing so might prolong the
time of charging. It is normal for the device to get warmer.
Note!
While charging the phone, make sure the air temperature is
between 0°C to +40°C.
Batteries are the subject to degradation over time. Therefore,
their ability to hold the charge will become reduced.
10

Advertisement

Table of Contents
loading

Table of Contents