Setting The Water Temperature - Rangemaster GEO Installation Instructions & Aftercare Information

Boiler for 4 in 1 tap
Table of Contents

Advertisement

4.

Setting the water temperature

1.
The current preferred temperature is displayed on the
centre of the screen.
2.
Once the boiler reaches this temperature you will see a
steady 'READY' status appear on the screen.
The default temperature is 98°C but you can set the desired
temperature anywhere between 80-98°C to suit your personal
preference (Fig. 4.1).
The maximum temperature of 98°C is based on the
n
L
UK maximum legal requirement for stored water.
3.
Press and hold the UP or DOWN scroll arrows to adjust
to the desired temperature.
4.
If the temperature of the water is below your preferred
set temperature the boiler will show a 'HEATING'
message.
5.
If the temperature of the water in the boiler is above
your preferred set temperature, the boiler will not reach
the desired lower temperature until the excess heat has
been naturally lost. This will happen faster if some of the
stored hot water is dispensed and therefore replaced
with cold.
Note: it is normal as with any hot water dispenser that
thermal energy is lost by the time it is dispensed into the cup.
Therefore, the temperature in the cup is not representative of
the tank temperature.
In order to reach the highest 'in cup' temperatures you should
first dispense and dispose a small amount of water to preheat
both the system and your cup.
Setting the clock
1.
By pressing the 'MENU' button, the SET CLOCK will be
highlighted.
2.
Press 'MENU' to enter the SET CLOCK menu. The time
will be displayed and the hour values will be flashing.
3.
Use the scroll arrows to select the correct value and
press MENU. The minute values will now be flashing.
4.
Use the scroll arrows again to select the correct values.
5.
To store the new set time press the 'MENU' button. This
will also take you back to the SET UP menu.
6.
To exit the SET UP menu press the 'POWER' button.
Due to our policy of continual improvement, we reserve the right to change specifications without prior notice.
FILTER
OVER TEMP
Tea type
green
Temperature
75-80
(°C)
Steeping time
1-2
(minutes)
Suggested temperatures for teas
7
Fig. 4.1
08:34
°
98
C
FILLING
oolong
black
80-85
98
2-3
2-3
herbal
98
3-6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aga

Table of Contents