Table of Contents
Advertisement
Cleaning your mixer tap and boiler
DO NOT use any proprietary household domestic cleaning
product on either the mixer tap or the boiler.
The mixer tap and HotFob should only be cleaned regularly
with mild dish soap, warm water and a non-abrasive cloth.
Once the tap is clean, please ensure you rinse with warm
water before drying thoroughly to prevent water marks.
If the tap has limescale marks it can be cleaned with a 50/50
mix of white vinegar and water and an old toothbrush. You
should then rinse with warm water and then dry off the
tap, again to prevent water marks reappearing as the water
evaporates.
Where the tap has a removable aerator on the spout exit,
it can be removed and cleaned periodically to maintain
optimum flow performance. If the flow rate is noticeably
slower than normal, or the water stream is spraying or shaped
incorrectly, it is probably due to the aerator in need of a clean.
The aerator (found at the end of the spout) can be unscrewed.
The plastic insert can now be descaled, rinsed and then
reinserted in the reverse order.
The boiler unit should require no regular cleaning externally
other than with a small amount of mild dish soap, water and a
non-abrasive cloth. Once cleaned, dry off the unit thoroughly.
DO NOT make the cloth any more than damp whilst wiping
the unit.
Due to our policy of continual improvement, we reserve the right to change specifications without prior notice.
15
Advertisement
Table of Contents
