Table of Contents
Advertisement
Fig. 3.4
SET CLOCK
SCREEN SETTINGS
LANGUAGE
Fig. 3.5
ON - 22:00 - OFF 06:00
Fig. 3.6
PERFORM SHUT DOWN?
Due to our policy of continual improvement, we reserve the right to change specifications without prior notice.
ECO MODE
ON
OFF
YES
NO
Note: Whilst in 'Child Lock' mode, the boiler will still dispense
but the boiler settings cannot be altered.
Setting the Eco mode
The boiler features 3 levels of energy saving:
ECO MODE (ON) After two hours of inactivity the boiler
automatically enters Eco mode (Fig. 3.4).
ECO MODE
The boiler enters Eco mode between the
(TIMED)
stated times (Fig. 3.5).
To set the Eco mode timer, simply scroll
down to 'ON' to set the desired time.
Once you are happy with the time that
has been set, press the menu button to
confirm this.
This will then take you to 'OFF' , where
you can then set the time that you want
the Eco mode to finish.
ECO MODE
The boiler does not enter Eco mode.
(OFF)
(Fig. 3.6). This is the least energy
efficient setting.
Shutting down
1.
To shut down the product, the 'POWER' button should
be held when on the normal operation screen for 10
seconds.
2.
The shutdown screen will appear and using the scroll
buttons, 'Yes' should be selected by pressing 'MENU'
(Fig. 3.6).
3.
The unit will then shutdown.
First fill cycle process
Once your product has been installed and set up,
n
n
complete two full fill and empty cycles, this should
have been performed by your installer, but if you
are unsure we recommend these steps are followed
regardless. These steps will allow any remains of
water from factory testing to be removed.
1.
Allow the unit to completely fill until the status screen
shows a steady state "ready".
2.
Using your HotFob, empty one full tank of water from
the unit, through the tap, until the water stops.
3.
Repeat steps 1-2 then your appliance is ready for use.
6
Advertisement
Table of Contents
