Adjusting the Rear Suspension
ED type
❙
Spring Preload
You can adjust the spring preload by the
adjuster to suit the load or the road surface.
Use the pin spanner and extension bar to
turn the adjuster. Position 1 to 2 decrease
spring preload (soft), or turn the position 4 to
7 increase spring preload (hard). The
standard position is 3.
Attempting to adjust directly from 1 to 7 or 7
to 1 may damage the shock absorber.
NOTICE
Do not attempt to disassemble, service, or improperly
dispose of the damper. See your dealer.
Other Adjustments
u
Pin spanner
Extension bar
Adjusting the Rear Suspension
7
6
5
4
Adjuster
3
2
1
117