Maintenance Fundamentals; Pre-Ride Inspection - Honda NC750XA Owner's Manual

Maintenance Fundamentals

Pre-ride Inspection

To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety,
but because having a breakdown, or even a
flat tyre, can be a major inconvenience.
Check the following items before you ride
motorcycle:
●
Fuel level − Fill fuel tank when necessary.
P. 66
2
● Throttle − Check for smooth opening and
full closing in all steering positions.
P. 113
2
●
Engine oil level − Add engine oil if
necessary. Check for leaks.
●
Coolant level − Add coolant if required.
Check for leaks.
76
P. 93
2
P. 99
2
●
Drive chain − Check condition and slack,
adjust and lubricate if necessary.
●
Brakes − Check operation;
Front and Rear: check brake fluid level and
pads wear. P. 101, 102
2
● Lights and horn − Check that lights,
indicators and horn function properly.
●
Engine stop switch − Check for proper
function.
●
Side stand ignition cut-off system − Check
for proper function.
● Wheels and tyres − Check condition, air
pressure and adjust if necessary.
NC750XA
●
Clutch − Check operation;
Adjust freeplay if necessary.
P. 106
2
P. 105
2
P. 83
2
P. 110
2