Checking The Side Stand - Honda NC750XA Owner's Manual

Side Stand

Checking the Side Stand

Side stand
spring
1. Check that the side stand operates
smoothly. If the side stand is stiff or
squeaky, clean the pivot area and
lubricate the pivot bolt with clean grease.
2. Check the spring for damage or loss of
tension.
3.
NC750XA
Sit on the motorcycle, put the
transmission in Neutral, and raise the side
stand.
NC750XD
Sit on the motorcycle and raise the side
stand.
4. NC750XA
Start the engine, pull the clutch lever in,
and shift the transmission into gear.
NC750XD
Start the engine and press the D/S side of
N-D switch to switch the transmission into
D mode.
5. Lower the side stand all the way. The
engine should stop as you lower the side
stand. If the engine doesn't stop, have
your motorcycle inspected by your dealer.
105