Adjusting The Rear Suspension - Honda CB650RA 2020 Owner's Manual

Adjusting the Rear Suspension

Adjusting the suspension requires a pin
spanner. We recommend that you have your
vehicle serviced by your dealer.
#
Spring Preload
You can adjust the spring preload by the
adjuster to suit the load or the road surface.
Use the pin spanner and extension bar to
turn the adjuster using a suitable pin spanner
and extension bar. Positions 1 to 2 are for a
decrease spring preload (soft), or turn the
position 4 to 10 increase spring preload
(hard).
The standard position is 3.
Other Adjustments
u
Extension bar
Pin spanner
NOTICE
Attempting to adjust directly from 1 to 10 or 10 to
1 may damage the shock absorber.
Do not turn the adjuster beyond its limits.
NOTICE
The rear shock absorber damper unit contains
high pressure nitrogen gas. Do not attempt to
disassemble, service, or improperly dispose of
the damper. See your dealer.
Adjusting the Rear Suspension
2 3456 7
1
Adjuster
8
9
10
103